chongming-core/config.toml

[default]
app.debug = false
app.description = "基于 FastAPI 的 chongming 打包脚手架"
app.name = "chongming"
app.version = "chongming"
env = "development"
prefix = "/api/v1"
upload_path = "uploads"

[zenoh]
json5_path = "./config/zenoh_config.json5"

[cache]
# backend = "sqlite"            # "sqlite"（默认，本机共享） | "redis"（跨主机）
backend = "redis"
# path = "./cache_data/cache.db"

# 配置优先来源模式（同时决定 [workers.config] 与 count 在启动时的取舍）：
#   "toml"  （默认） = 以文件为准：启动时用 config/workers/<type>/config.toml 的
#                      [workers.config] 与 count 覆盖写入 cache（前端读 cache，因此随之显示
#                      toml 值）；运行期经管理接口（/admin/workers/<type>/config、/scale）
#                      改的值仅本次运行有效，重启网关即被文件覆盖。
#   "cache"          = 以缓存为准：chongming-cache 为单一事实来源，插件初始化即读缓存值，
#                      管理接口改动跨重启保持；toml 仅在 cache 缺失时引导。启动日志会提示
#                      toml 与 cache 的差异键（以 cache 为准）；如需让 toml 改动生效，先删除
#                      worker:cm:configs:<type>（运行时配置）/ worker:cm:counts:<type>（副本数）
#                      缓存键再重启，或改用 "toml" 模式。
launch_worker_count = "toml"

# redis 后端专用（backend = "redis" 时生效，均有默认值）
redis_host = "127.0.0.1"
redis_port = 6379
redis_db = 0
redis_password = ""
redis_prefix = "chongming:"

[security]
algorithm = "HS256"
secret_key = "your-secret-key-change-in-production"

[development]
debug = true
env = "development"

[development.server]
access_log = false
host = "0.0.0.0"
port = 8000
reload = true

[development.logging]
file = "logs"
format = "%(asctime)s - %(name)s - %(levelname)s - %(message)s"
level = "DEBUG"
# access 日志采样率：0.1 = 只记录 10% 的成功请求（错误 >=400 始终全量）
# 1.0 = 全量记录；配合异步日志队列降低高吞吐下主线程开销
access_sample_rate = 0.1

[development.cors]
allow_credentials = true
allow_headers = ["*"]
allow_methods = ["*"]
# 注意：allow_credentials=true 时 allow_origins 不能为 ["*"]（starlette 会丢弃该 header），
# 需显式列出来源；本地前端 dev 端口会变化（5173/5174/...）。
allow_origins = [
  "http://localhost:5173",
  "http://127.0.0.1:5173",
  "http://localhost:5174",
  "http://127.0.0.1:5174",
]

[development.mqtt]
enabled = true
# host = "0.0.0.0"
host = "127.0.0.1"
port = 1883
# 是否由网关启动内嵌 amqtt Broker 子进程：
#   true  （默认）= 网关自带 amqtt Broker，host/port 为 Broker 监听地址
#   false          = 使用外部 MQTT Broker，网关仅启动 Bridge 客户端连接
#                    host/port 需指向外部 Broker 地址（如 "192.168.1.10"）
# use_embedded_broker = true
use_embedded_broker = false
# MQTT Broker 认证（可选，默认匿名）：
#   - 内嵌 Broker（use_embedded_broker=true）：配置后要求所有客户端（含网关 Bridge）
#     用该账号密码连接，未配置则保持匿名
#   - 外部 Broker：网关 Bridge 用该账号密码连接（broker 侧自行配置对应账号）
# 注意：密码为明文存储，生产环境建议使用外部 Broker + 环境变量注入
# username = "chongming"
# password = "change-me"

# MQTT Bridge 额外订阅主题推荐声明在各插件自己的配置里：
#   config/workers/<type>/config.toml  →  [[workers.mqtt_topics]]
# （如 aibox_sophon_adapter 插件的 /board_ping 心跳主题）
# 全局 [<env>.mqtt].custom_topics 仍可作为通用兜底（可选，不推荐）。

[development.mqtt.broker]
# amqtt Broker 可选配置，默认允许匿名连接
# 详细参数参考: https://github.com/Yakifo/amqtt

[plugins_worker]
config_path = "./config/workers/config.toml"

[pyinstaller_build_import]
base = [
  "utils", # public 骨架
  "utils.launch",
  "utils.config",
  "zenoh",
  "chongming_worker",
  "chongming_worker.contracts",
  "chongming_worker.route_config",
  "chongming_worker.routes_publisher",
  "chongming_request",
  "chongming_auth",
  "server",
  "module_bank", # 模块化打包工具
  "sqlite_vfs",
  "sqlite_vfs.core",
  "sqlite_vfs.contrib",
  "sqlite_vfs.contrib.fastapi_static",
  "fastapi", # web 应用依赖
  "fastapi.staticfiles",
  "fastapi.middleware.cors",
  "fastapi.middleware.gzip",
  "uvicorn",
  "chongming_cache",
  "chongming_cache.backends",
  "chongming_cache.backends.sqlite_",
  "orjson",
  "python_multipart",
  "volcenginesdkarkruntime",
  "chongming_jwt",
  "chongming_database",
  "chongming_config",
  "chongming_password",
  "chongming_stream_manager",
  "chongming_mqtt",
  "chongming_mqtt.mqtt_forward",
  "chongming_mqtt.mqtt_subscribe",
  "chongming_mqtt.internal_mqtt",
  "aiosqlite",
  "asyncpg",
  "aiofiles.os",
  "sqlmodel",
  "amqtt",
  "bytedance",
  "bytedance.volcengine_aicc_sdk",
  "bytedance.volcengine_aicc_sdk.secure_http_client",
  "aiofiles",
  "openai",
]
linux = [
  "gunicorn.glogging",
  "gunicorn.app",
  "gunicorn.app.wsgiapp",
]
windows = []

[production.module_system]
path = [
  ["resources/app.mbank", "src/chongming/app", "app"],
  ["resources/plugins.mbank", "src/plugins", "plugins"],
]
type = "module-bank"